It is currently 19 Feb 2018 19:42


CLUB SPARES

  • Author
  • Message
Online

dave the rave

Site Admin

  • Posts: 1493
  • Joined: 25 Sep 2012 16:50
  • Location: Coventry, England

CLUB SPARES

Post09 Nov 2016 11:34

Updated club-spares info from Derek, our spares secretary. (02/18).

The club spares project has now been running for seven years and has proved to be very popular with our members. Over the years, and with their enthusiastic support, we have now sourced and manufactured an extensive amount of stock. We are now probably the largest supplier of A40 Farina parts (in the world!!) and, with virtually no overheads, are usually the least expensive. We also supply reconditioned parts (on an exchange basis) and are constantly researching additional spares re-manufacturing projects. We send to both the UK and overseas destinations almost daily.
Although we only sell to members the club’s low club annual subscriptions make joining a worthwhile investment. It is no coincidence that club membership has increased steadily during recent years. Parts and initial joining fees can be paid for by credit/debit card.
We hold such a large selection of parts that it’s impossible to list all here but below is a list of our more popular items:

BODYWORK etc.

In 2016 we expanded our range of parts re-manufacture to include body repair sections. Those now stocked include:
Mark 1 outer sills which have been pressed to OE specification. BLA1676
Front valances. BLA1596
Front wing lower rear sections.
Mk 1 & 2 Rear wing repairs sections covering the front and repair lower areas and the wheel arch.
Inboard below light cluster repair fillets.
Mark 1 and 2 Grille support channels. BLA1572 and BLA1994
Mark 1 and 2 Rear valances. The Mark 2 includes the cross member. BLA1600 and BLA1988
Replacement rear view mirror glasses.

SALOON BOOT SKINS.

(A batch of boot lid inner frames are due to be pressed in June)
We are currently costing production of pressed and assembled Mark 1 and Mark 2 front wings.
Although stocks vary considerably as of 02/18 we also hold a selection of New Old Stock (NOS) body parts including front aprons and front bulkheads, Mark 2 sills, a Mark 1 bonnet plus some rear wings and quarters and some bumpers.
We also have an offsite store containing second hand doors, Mark 2 bonnets and other large items.

RUBBER SEALS

We have had a number of rubber seals and other items re-manufactured for stock. These include:
Saloon and Countryman rear screen seals. 14A5623 and 14A7218
Rubber plugs for jacking point. 14A5571
Front quarter light rubber seals assembled from multipart rubbers sections and mouldings.
Rear opening side window seals made to the correct original cross-section.
Saloon boot lid seals made to the correct original cross-section. Countryman solutions also available.
Mark 2 headlight rubber gaskets produced. 13H516. Mark 1 also available. 2A9115
Door rubber seals (bought in bulk quantities).
Cylinder repair seals and brake hoses (bought in bulk quantities).

BRAKE PARTS

The club supplies re-sleeved (with stainless steel) front wheel brake cylinders (sold fully assembled) and Mark 1 frame brake cylinders on an exchange basis. GWC108 and GWC109.
In addition we carry stocks of all consumable brake parts. We can also supply master cylinders, Mark 2 rear wheel brake cylinders, all types of brake shoes, springs, cables and hoses and pedal rubbers. We have replacement (copper) brake pipe sets which are made for the club at below market prices. We also have replacement (copper) fuel pipe and fittings from the same supplier.

FRONT SUSPENSION/STEERING

We supply from stock: king pin sets and offer an exchange stub axle reaming service. Also exchange wishbones, exchange Mark 2 anti-roll bar drop links, exchange lever arm dampers, all fulcrum pins, all rubber bushes and buffers and wheel bearings.

REAR SUSPENSION

U-bolts, bushes, shackles and pins. Wheel bearings.
Exchange lever arm dampers and new telescopic.
Rear spring recommendations via our supplier who offers a 20% discount to club members.

DOORS

The club has had the following parts made:
Window channel sets. 14A5626/14A5627 and 14A9855/14A9856
Window weather strips. 14A5613/14a5614
Steel channels, bottom of glass. Mk1- 14A5707 and Mk2- 14A8267
Front quarter light rubber seals, a multipart kit assembled from rubbers sections and mouldings.
We also have locks, handles, mouldings hinges and clips available.

QUALITY SERVICING PARTS

We have learnt from experience that a number of the servicing parts on the market are of dubious quality and for that reason we now stock the following:
Champion Plugs, Condensers (yellow wire type), Points (fibre heel type)
Rotor arm (red no rivet type), HT lead sets (copper wire), Oil and air filters

ENGINES and GEARBOXES

We stock timing chains, seals, sensors, gaskets and most ancillaries.
Reconditioned units are available from specialist suppliers.

CLUTCH

Borg and Beck 3 part clutches. Master cylinders and slave cylinders.
Replacement (copper) pipework. Pedal rubbers.

STEERING

New and s/h drag links, both fixed and adjustable. New and s/h steering idlers, Mark 1 and Mark 2.
Good condition second hand steering columns and replacement seals.

ELECTRICAL

Dynamos and starter motors. Control and fuse boxes. Wipers/arms and motors. Lamps and headlights.

OTHER PARTS

Just too many to list!
Attachments
A40 repair sections ( Feb 18 ).pdf
(855.69 KiB) Downloaded 2 times

Return to CLUB SPARES SCHEME

Who is online

Users browsing this forum: No registered users and 3 guests